DC Current Detection Module Relay Digital Display Overcurrent Alarm Switch Controller Motor Stall Protection Control Switches | 24V

Pump & Motor AssembliesSpecification:Detection range: DC current between 0~10ADetection accuracy: 0.01A (10ma)With error calibration function, the display can be turned off for a long time, reducing power consumptionStandby current: about 20maRelay output: can control the on-off of the DC line within 5ASetup Instructions:Power on to display the measured current; (if the measured current terminal is floating, the digital display is a normal phenomenon)It takes more than 1 second to press K1 for the first time to prevent false triggering. The screen displays: P 11: K2 adjustment mode, K3 adjustment functionPress K1 for the second time, the screen flashes and displays: 0.05 means the value of the threshold I1 is 0.05A; K2 sets I1 plus, K3 sets I1 minusPress K1 for the third time, the screen flashes: 0.10 means the value of the threshold I2 is 0.1A; K2 sets I2 plus, K3 sets I2 minusPress K1 for the fourth time, the screen displays the measured current ; it means entering the standby state;Long press K2 or K3 in standby state to fine-tune the measured current errorPacking list:Current detection module*1Power Source : DCContact Load : Low Power

• Pump & Motor Assemblies
• Specification:
• Detection range: DC current between 0~10A
• Detection accuracy: 0.01A (10ma)
• With error calibration function, the display can be turned off for a long time, reducing power consumption
• Standby current: about 20ma
• Relay output: can control the on-off of the DC line within 5A